DIY Paper Toss Bouqet

Last week we made a toss bouquet for Britany's Phantom of the Opera themed wedding! It turned out so cute we wanted to share it! We made these lovely paper roses from sheet music we downloaded and then coffee dyed. We used these great tutorials we found Here to dye the sheet music and the paper rose tutorial we found Here. We pretty much followed these tutorial to the letter the only thing we changed was adding a paper collar to the bouquet to hide the stems.
For the collar we drew a circle on light weight poster board just big enough to cover the underside of the bouquet. Then we found the center of the circle and cut a slit to that point. Then cut another circle  and put the stems though and over lapped the the ends of the slits until the poster board made a cone and fit snugly under the rose heads. Then we stapled the overlapped edges and together.
To cover the poster board we simply spray painted a coffee filter gold and fitted it over the cone poster board (the filter just happened to be the right size about an inch larger than the circle so it peaked out around the rose heads). The same way we fitted the cone on the bouquet only gluing the filter to the cone with white glue.

We think it turned out really cute and so did the bride to be!

DIY Pink Paper Peony Tutorial

For these paper flowers I dyed coffee filters with tropical punch and black cherry Kool-aid (the difference in shade is not noticeable). I added the Kool-aid and 1/4 cup vinegar to 1 quart water in a flat pan mixing until the Kool-aid dissolved. Depending on the shade of pink you want you can dip the filters in only part way and the tips of the petals will be darker pink and fade to white in the center or dip the all the way in and soak for a much darker pink. Also how many you dye stacked together will cause the filters in the middle to be a lighter pink. First, I tried dying each one separately, it took too long, but the colors of the filters were more uniform. (If that's what you want you should time how long you leave them in and use the same time for each filter.) I found I liked the less uniform colors and the flowers looked more natural. After the filters reached the color I wanted. I wrung the excess dye back into the container and placed the filters on a cooling rack set on   top of a cookie sheet. To speed up the drying process I heated my oven to 250 and put the filters in the oven Checking them every 5-10 min. until the filters were Dry. ( It's easier to separate the filters after they are dry.)  

                                                          

SUPPLIES

 

     When I cut the petal shapes I stacked 4 filters together and folded into fourths. Then started my petals about an inch and a-half up from the point. You can leave the petals rounded at the tips like I did or make them jagged by unfolding the filters once and clipping small notches in them.

I unfolded the fillers and left them stacked together. Then took a pencil and rolled the ends of the petals around it and slightly push the edges of the petal together. Then I separated the filters and  re-stacked them so the petals overlapped the gaps.

                                                            

 For the center I folded two of the darkest filters together like the petals. I cut about and inch and a-half from the point jaggedly. Then I stacked these on top of the petals. From there I took a 4 inch piece of wire and put it through all ten layers about an 1/8 inch from the center then I put the other end through about a 1/4 inch from where I put the first end. Then pulled up and gently twisted each layer. After I had the flower the way I wanted it to look I twisted the wire together tightly and fluffed the petals.

 Finished Peony

Let us know if you made your own peonies and leave a picture of how it turned out!

Rustic Snowball Flower Arch

This is the time of year we usually would be getting decorations ready for Venture High Prom but Colton my youngest graduated  last year!!!  For the past couple of years we have been putting the over abundance of snowballs from my Mom's garden to good use at Venture's senior Prom. Well with With no Prom to decorate for and a ton of beautiful white flowers in her garden. My Mom asked me if I would like to try an idea I had last year and of course I couldn't say no to my Mother and Sierra couldn't say no to hers. It took us about 2 hours to put the arch together. We borrowed a couple of old garden pots from my Mom's patio and filled them with dirt. We cut 8 limbs off othe bushes we tried to keep them fairly log about 12 to 14 feet. We pushed the branches into the pot all the way to the bottom and wired them together Then we overlapped the branches and wired them together about a foot above the pot and again another foot up. In the center of the arch we wired touching branches together in several different places until it was strong enough to stand. Then we placed snowballs on the arch to fill in holes and hide wire.

It turned out lovely! 

Sierra working hardon the arch.

My Mom checking out our work.

Red and Pink, Rose Petal Wedding Aisle Runner!!

Today we are going to share the aisle runner we made for Chris and Jerina's red pink and black wedding!! 

What you need for this wedding aisle runner. 

30" X 25' plain aisle runner or tulle fabric. (We used a plain white aisle runner bought from Walmart)

Silk rose petals 7 red 8 pink 300ct. package (we bought ours at the dollars store.)

1 can of krylon spray adhesive (bought at Michaels)

Hot glue gun and glue sticks.

Optional: 3' curtain rod or dowl.

5'6" ribbon any width.

Work in 2' sections spray  fabric with adhesive. Press petals on to fabric allowing them to over lap covering the fabric. Use one color for the first 4 feet then start adding the 2nd color. We did the first four feet on both sides first and filled in the middle. Loose petals and petals that were overlapping several others were hot glued in place.

When you have finished gluing the petals on. Roll the curtain rod or dowl up in the aisle runnerpetals on the inside.

Tie a slip knot on both ends of the ribbon. Slip ribbon on either side of the curtain rod and tighten just enough for it to glide when it is rolled out.